যেসব পণ্যের বিএসটিআই লাইসেন্স বাধ্যতামূলক, ব্যবসায় করলে জেনে নিন

2264
বিএসটিআই লাইসেন্স করার নিয়ম

বিএসটিআই লাইসেন্স সম্পর্কে নিশ্চয়ই শুনেছেন। খাবার ও ঘরের কাজে ব্যবহৃত সামগ্রী, প্রসাধনী, কাপড়, জুতা, ইলেকট্রিক ও নির্মাণকাজে ব্যবহৃত পণ্যসহ দুই শতাধিক পণ্য বাজারজাতকরণের জন্য বিএসটিআই লাইসেন্স নিতে হয়। বিএসটিআই লাইসেন্স ছাড়া পণ্যগুলো বাজারজাত করলে আপনার বিরুদ্ধে আইনানুগ ব্যবস্থা নিতে পারবে কর্তৃপক্ষ।
এই নিবন্ধে আমরা জানবো বিএসটিআই কী? বিএসটিআই পণ্য তালিকা এবং বিএসটিআই লাইসেন্স করার নিয়ম সম্পর্কে।

লেখাটিতে যা আছে.... লুকিয়ে রাখুন
সচরাচর জিজ্ঞাসা (FAQ)

বিএসটিআই কী?

বিএসটিআই হলো- বাংলাদেশ সরকারের শিল্প মন্ত্রণালয়ের অধীনে স্বায়ত্বশাসিত একটি প্রতিষ্ঠান। পণ্য ও সেবার মান প্রণয়ন, গুণগতমান ও পরিমাপ নিশ্চিতকরণের নিমিত্ত সেবাসমূহকে আন্তর্জাতিক/আঞ্চলিক মানদণ্ডে উন্নীতকরণ এবং সেবাগ্রহীতাদের স্বার্থ রক্ষাক্রমে জাতীয় ও আন্তর্জাতিক বাণিজ্যে সহায়তার লক্ষ্যে প্রতিষ্ঠিত হয় বিএসটিআই (BSTI)।

বিএসটিআই -এর পূর্ণরূপ কী?

বিএসটিআই -এর পূর্ণরূপ হচ্ছে, বাংলাদেশ স্ট্যান্ডার্ড অ্যান্ড টেস্টিং ইনস্টিটিউট (Bangladesh Standards and Testing Institution)।

বিএসটিআই কোন মন্ত্রণালয়ের অধীনে?

১৯৮৫ সালে বাংলাদেশ সরকারের জারীকৃত অধ্যাদেশ ৩৭ (The Bangladesh Standards and Testing Institution Ordinance, 37 of 1985) এর মাধ্যমে সেন্ট্রাল টেস্টিং ল্যাবরেটরি (CTL) এবং বাংলাদেশ স্ট্যান্ডার্ডস ইন্সটিটিউশনকে (BDSI) একীভূত করে শিল্প মন্ত্রণালয়ের অধীনে স্বায়ত্বশাসিত প্রতিষ্ঠান হিসেবে বাংলাদেশ স্ট্যন্ডার্ডস অ্যান্ড টেস্টিং ইনস্টিটিউশন (BSTI) প্রতিষ্ঠিত হয়। পরবর্তীতে ১৯৯৫ সালে বাণিজ্য মন্ত্রণালয়ের অধীনস্ত কৃষি পণ্য বিপণন ও শ্রেণীবিন্যাস পরিদপ্তরটিও (Department of Agricultural Grading and Marking) বিএসটিআই’র সঙ্গে একীভূত হয়।

বিএসটিআই -এর কাজ

দেশের মান নিয়ন্ত্রণকারী একমাত্র প্রতিষ্ঠান হিসেবে বিএসটিআই -এর মূল কাজ হচ্ছে-
ক) দেশে উৎপাদিত শিল্পপণ্য, বৈদ্যুতিক ও প্রকৌশল পণ্য, খাদ্য ও কৃষিজাত পণ্যের প্রক্রিয়া ও পরীক্ষণ পদ্ধতির জাতীয় মান প্রণয়ন।
খ) প্রণীত মানের ভিত্তিতে পণ্যমাসগ্রীর গুণগত মান পরীক্ষণ/বিশ্লেষণ এবং পণ্যের গুণগত মানের নিশ্চয়তা বিধান।
গ) দেশে ব্যবসা-বাণিজ্যের ক্ষেত্রে মেট্রিক পদ্ধতির প্রচলন, বাস্তবায়নসহ ওজন ও পরিমাপের সঠিকতা তদারকি ও নিশ্চিতকরণ।

সুষ্ঠুভাবে এ সকল কর্মকাণ্ড সম্পাদনের মাধ্যমে দেশে শিল্পের বিকাশ, মানসম্পন্ন পণ্য উৎপাদন এবং পণ্যমানকে বর্তমান মুক্তবাজার অর্থনীতির প্রতিযোগিতায় উপযোগী করে তোলা বিএসটিআই -এর লক্ষ্য। এ লক্ষ্যকে সামনে রেখে অবাধ বাণিজ্যের পরিবেশে পণ্য মানকে আন্তর্জাতিক বাজারের উপযোগী করে তুলতে বিএসটিআই কাজ করে যাচ্ছে।

বিএসটিআই পণ্য তালিকা

কিছু পণ্য আছে যেগুলো বাজারজাতকরণের আগে আপনাকে অবশ্যই বিএসটিআই লাইসেন্স বা অনুমাদন নিতে হবে। ২০২১ সালের ২৫ মার্চ বিএসটিআই- এর ওয়েবসাইটে দেয়া তথ্য অনুযায়ী ২২৭টি পণ্য বাজারজাতকরণের ক্ষেত্রে বিএসটিআই লাইসেন্স নেয়া বাধ্যতামূলক। পণ্যগুলি হলো-

List of 227 Products Brought Under Mandatory Certification Marks Wing:
(On 23-03-2021)A. Agricultural and Food Products (88 Items):
SI.
No.
Name of the Products Standard No. and Year
1 Plywood Tea – Chest BDS 18:2006 (2nd Revision)
2 Mustard Oil BDS 25:2015 (2nd Revision)
Amend-1:2020
3 Refined Sugar BDS 138:2006 (2nd Revision),
Amend-1:2008
4 Suji (Semolina) BDS 190:2016 (2nd Revision)
5 Poultry Feeds BDS 233:2019 (3rd Revision)
6 Wheat Atta BDS 380:2007 (2nd Revision)
7 Maida BDS 381:2007 (3rd Revision)
8 Bread BDS 382:2016 (3rd Revision),
Amend-1:2018
9 Biscuits BDS 383:2001 (2nd Revision)
10 Macaroni, Spaghetti and Vermicelli BDS 384:2017 (2nd Revision)
11 Lozenges BDS 490:2014 (3rd Revision)
12 Canned and Bottled Fruits BDS 503:2006 (1st Revision)
13 Fruit Squashes BDS 506:2002 (2nd Revision)
14 Fruit Cordial BDS 508:2006 (2nd Revision)
15 Sauce (Fruits or Vegetables) BDS 512:2017 (2nd Revision)
16 Fruits and Vegetables Juices BDS 513:2013 (3rd Revision)
17 Tomato Paste BDS 517:2015 (3rd Revision)
18 Fermented Vinegar BDS 523:2015(2nd Revision)
19 Concentrated Fruit Juice BDS 527:2015 (2nd Revision)
20 Fruit Syrup BDS 528:2019 (3rd Revision)
21 Tomato Ketchup BDS 530:2002 (2nd Revision)
22 a) Soluble Coffee Powder

b) Roasted and Ground Coffee
c) Roasted Coffee – Chicory Powder

a) BDS 763:2016 (2nd Revision)
Amend-1:2020
b) BDS 805:2016 (1st revision)
c) BDS 806:2016 (1st revision)
23 Plywood for General Purposes BDS 799:2006 (2nd Revision)
24 Banaspati BDS 804:2011 (2nd Revision)
25 Milk Powder BDS 860:2020 (2nd Revision)
26 Butter Oil and Ghee BDS 908:2012 (2nd Revision)
Amend-1:2020
27 Turmeric Powder BDS 991:2020 (2nd Revision)
28 Wheat Bran BDS 997:2006 (1st Revision)
29 Toffees BDS 1000:2001 (1st Revision)
30 Wafer Biscuit BDS 1001:2010 (1st Revision)
31 Chilli Powder BDS 1017:2020 (2nd Revision)
32 Safety Matches in Boxes BDS 1040:2006 (1st Revision)
33 Ice Cream BDS 1083:2006 (1st Revision)
34 Coriander Powder BDS 1084:2015 (1st Revision),
Amend-1:2020
35 Mosquito Coil BDS 1089:2018 (3rd Revision)
36 Noodles BDS 1106:2015 (2nd Revision)
37 Carbonated Beverages BDS 1123:2013 (3rd Revision)
38 Malathion 57 % (W/V) (Emulsifiable Concentrates) BDS 1179:2001 (1st Revision)
39 Curry Powder BDS 1205:2013 (2nd Revision),
Amend-1:2020
40 Iodized Salt BDS 1236:2020 (2nd Revision)
41 Drinking Water BDS 1240:2001 (1st Revision)
42 Natural Mineral Water BDS 1414:2000 (1st Revision)
43 Lassi (Yoghurt Drink) BDS 1470:2015 (1st Revision)
44 Flavoured Milk BDS 1471:2012 (1st Revision)
45 Chewing Gum, Ball Gum and Bubble Gum BDS 1498:2012 (1st Revision)
46 Instant Noodles BDS 1552:2015 (2nd Revision)
47 Chips and Crackers BDS 1556:2017 (1st Revision),
Amend-1:2019
48 Chanachur BDS 1564:2016 (1st Revision)
49 Cakes BDS 1574:2012 (2nd Revision)
50 Fruit Drinks BDS 1581:2015 (2nd Revision)
51 Soft Drink Powder BDS 1586:2007 (1st Revision)
52 Lachsa Shemai BDS 1620:2000, (Amend-1:2020)
53 Pasteurized Milk BDS1702:2019 (1st Revision)
54 Fortified Soybean Oil BDS 1769:2014 (1st Revision)
55 Fortified Edible Palm Oil BDS 1770:2014 (1st Revision)
56 Fortified Edible Sunflower Oil BDS 1773:2016 (1st Revision)
57 Fortified Palm Olein BDS 1774:2006, Amend-1:2014
58 Sweetened/Unsweetened Condensed Filled Milk BDS 1780:2014 (1st Revision)
59 Muri (Puffed Rice) BDS 1796:2008
60 Edible Jell BDS 1801:2015 (2nd Revision),
Amend-1:2018
61 Ultra High Temperature Milk and Ultra High
Temperature Homogenized Milk
BDS 1805:2008
62 Cumin Powder BDS 1807:2008, Amend-1:2020
63 Ice Lolly BDS 1847:2011
64 Low Fat Milk BDS 1866:2013
65 Artificial Flavoured Drinks BDS 1877:2014
66 Fortified Edible Rice Bran Oil BDS 1886:2014
67 Synthetic Vinegar BDS  1896:2015
68 Potato Chips BDS 1927:2017
69 Fish Feed BDS 1915:2016
70 Corn Flakes BDS  1957:2018
71 Oats BDS 1960:2019
72 Dextrose Monohydrate BDS CAC 8:2007
73 Liquid Glucose (Glucose Syrup) BDS CAC 9:2006
74 Honey BDS CAC 12:2007
75 Canned Pineapple BDS CAC 42:2007
76 Infant Formula and Formulas for Special Medical
Purposes Intended for Infants
BDS CAC 72:2008
77 Processed Cereal Based Food for Infants and
Young Children
BDS CAC 74:2007
78 Chocolate BDS CAC 87:2008
79 Follow-Up Formula BDS CAC 156:2008,
Amend-1:2009
80 Sugar BDS CAC 212:2006
81 Fermented Milk BDS CAC 243:2015
82 A Blend of Skimmed Milk and Vegetable Fat in
Powdered Form
BDS CAC 251:2018
83 Pickled Fruits and Vegetables BDS CAC 260:2014
84 Jams, Jellies and Marmalades BDS CAC 296:2014
85 Butter BDS CAC A-1:2002
86 Sweetened Condensed Milk BDS CAC A-4:2002
87 Black Tea – Definition and Basic Requirements BDS ISO 3720:2017
88 Instant Tea in Solid Form – Specification BDS ISO 6079:2015
B. Chemical Products (60 items):
89 Laundry Soaps BDS 12:2019 (3rd Revision)
90 Toilet Soap BDS 13:2006 (3rd Revision)
Amend-1:2008
91 Coal Tar Black Paint (Alquatra) BDS 69 (Part-2):1991
Amend-1:2006
92 Stamp Pad Ink BDS 90:2011 (2nd Revision)
93 Coconut Oil BDS 99:2007 (2nd Revision)
94 Aluminium Sulphate, Non Ferric BDS 149:2014 (2nd Revision)
95 Triple Super Phosphate (T.S.P.) BDS 216:1991 (1st Revision)
Amend-1, 2:2007
96 Urea (Fertilizer) BDS 217:2011 (2nd Revision)
97 Pencils BDS 330:1993 (1st Revision)
Amend-1:2006
98 Sole Leather (Vegetable Tanned) BDS 340:2012 (2nd Revision)
99 Internal Combustion Engine Crankcase Oils
(Diesel and Gasoline)
BDS 343:2012 (1st Revision)
100 High Speed Diesel BDS 344:2020 (3rd Revision)
101 Unleaded Motor Gasoline – Premium BDS 346:2010 (4th Revision)
Reaffirmed 2020
102 Unleaded Motor Gasoline – Regular BDS 347:2019 (5th Revision)
103 Ready Mixed Paint, Brushing, Finishing Semi-Gloss
for General Purpose.
BDS 402:1989 (1st Revision)
Amend-1, 2:2007
104 Writing and Printing Papers BDS 405:2012 (2nd Revision)
105 Carbon Paper for Type Writer BDS 411:1989 (1st Revision)
Amend-1:2006
106 Ceramic Tableware BDS 485:2000 (2nd Revision)
Amend-1, 2, 3:2006
107 Newsprint BDS 845:2012 (2nd Revision)
108 Shoe Polish, Paste BDS 1006:1981 Amend-1:2006
109 Tooth Paste BDS 1216:2012 (2nd Revision)
110 Shaving Cream BDS 1241:2017 (1st Revision)
111 Shampoo, Surfactant Based BDS 1269:2014 (2nd Revision)
112 Skin Powders BDS 1337:2015 (1st Revision)
113 Hair Oils BDS 1339:2018 (1st Revision)
114 Tooth Powder BDS 1370:2017 (1st Revision)
115 Skin Creams BDS 1382:2019 (3rd Revision)
116 Ball Point Pens BDS 1384:2002 (1st Revision)
117 Nail Polish BDS 1421:1992
118 Enamel Synthetic Exterior:
(a) Undercoating (b) Finishing
BDS 1423:2018 (1st Revision)
119 Lipstick BDS 1424:1993, Amend-1, 2:2006
120 Tableware Made of Melamine Moulding Compound BDS 1425:2009 (1st Revision)
121 Synthetic Detergent Powder BDS 1445:2019 (2st Revision)
122 After Shave Lotion BDS 1524:2006 (1st Revision)
123 Household Dish Washing Liquid BDS 1554:1997
124 Direct Moulded Sole (DMS) Boots for General
Purposes
BDS 1555:1997
125 Diammonium Phosphate BDS 1628:2000
126 Rotational Moulded Polyethylene Water Storage
Tanks
BDS 1699:2002
127 Cement Paints BDS 1706:2015 (1st Revision)
128 Liquid Toilet Cleaner BDS 1707:2002
129 Facial Tissue Paper BDS 1723:2003
130 Toilet Tissue Paper BDS 1745:2006
131 Baby Oil BDS 1766:2019 (1st Revision)
132 Toilet Soap for Babies BDS 1798:2019 (1st Revision)
133 Tableware Made of Urea Moulding Compound BDS 1825:2011 (1st Revision)
134 Emulsion Paint BDS 1827:2018 (1st Revision)
135 Float Glass BDS 1832:2010
136 Economy Emulsion Paint (Distemper) BDS 1833:2018 (1st Revision)
137 Skin Powder for Babies BDS 1844:2011
138 Skin Creams and Lotions for Babies BDS 1858:2019 (1st Revision)
139 Floor Liquid Detergents BDS 1859:2012
140 Glass Tableware BDS 1874:2013
141 Baby Shampoo BDS 1884:2014
142 Skin Lotions BDS 1923:2019 (1st Revision)
143 Shoes (Physical) BDS 1944:2018
144 Specification For Containers for Packaging of
Mineral Water and Drinking Water
BDS 1958:2019
145 Natural Henna/Mehedi (Powder and Paste) BDS 1966:2019
146 Synthetic Colour Paste BDS 1967:2019
147 Liquid Hand Wash BDS 1973:2019
148 Alcohol Based Hand Sanitizers BDS 1980:2020
C. Engineering Products (29 items):
Sl. No. Name of the Products Standards No. and Year
149 Common Building Clay Bricks BDS 208:2009 (3rd Revision)
150 Safety Razor Blades BDS 219:2002 (1st Revision)
151 Portable Fire Extinguisher BDS 825:1991 (1st Revision)
Reaffirmed 2007
152 Bi-Cycle Rims BDS 986:2006 (1st Revision)
153 Mild Steel (MS) Pipe and Galvanized Iron (GI) Pipes BDS 1031:2006 (1st Revision)
154 Gp Sheets (With Corrugated Sheets) BDS 1122:1987 Reaffirmed 2007
155 Protective Helmets for Scooter & Motor Cycle Riders BDS 1136:1986 Reaffirmed 2007
156 Sanitary Ware Appliances BDS 1162:2014
157 Gold BDS 1515:1995
158 Hollow Clay Bricks and Blocks BDS 1803:2008
159 Disposable Razor Blades BDS 1838:2011
160 Specification for Energy-Efficiency Rating of
Household Refrigerators, Refrigerator-Freezers and
Freezers
BDS 1850:2012
161 Performance of Air Conditioners and Heat Pumps –
Energy Labeling and Minimum Energy Performance
Standard (MEPS) Requirements
BDS 1852:2012
162 Specification for Household Refrigerators/Freezers BDS 1849:2012
163 Specification for Pipes and Fittings Made of
Unplasticized Polyvinyl Chloride (PVC-U) used for
Potable Water Supply
BDS 1878:2015
164 Specification for Extruded Profiles of Aluminum and
Aluminum Alloys
BDS 1879:2014
165 Cement – Part: 1 Composition, Specifications and
Conformity Criteria for Common Cements
BDS EN 197-1:2003
Reaffirmed 2010
166 Sanitary Tapware – Single Taps and Combination Taps
for Water Supply Systems of Type 1 and
Type 2 – General Technical Specification
BDS EN 200:2009
167 Concrete Paving Blcoks – Requirements and Test
Methods
BDS EN 1338:2009
168 Bitumen and Bituminous Binders – Specification for
Paving Grade Bitumen
Bitumen and Bituminous Binders – Framework for
Specifying Cationic Bituminous Emulsions
BDS EN 12591:2009

BDS EN 13808:2009

169 Unplasticized Polyvinylchloride (PVC-U) Profiles for
The Fabrication of Windows and Doors – Classitication, Requirements and Test Methods
BDS EN 12608:2008
170 Passenger Car Tyres and Rims (Metic Series) –
Part 1: Tyres
Passenger Car Tyres and Rims (Metic Series) – Part 2: Rims
BDS ISO 4000-1:2012

BDS ISO 4000-2:2012

171 Truck and Bus Tyres and Rims (Metric Series) –
Part 1: Tyres
Truck and Bus Tyres and Rims (Metric Series) – Part 2: Rims
BDS ISO 4209-1:2012

BDS ISO 4209-2:2012

172 Plastics Piping Systems – Polyethylene (PE) Pipes and
Fittings Used for Water Supply – Part 1: General Plastics Piping Systems – Polyethylene (PE) Pipes and Fittings Used for Water Supply – Part 2: Pipes
Plastics Piping Systems – Polyethylene (PE) Pipes and
Fittings Used for Water Supply – Part 3: Fittings
BDS ISO 4427-1:2010

BDS ISO 4427-2:2010

BDS ISO 4427-3:2010

173 Motorcycle Tyres and Rims (Metric Series) – Part 1:
Design Guides
Motorcycle Tyres and Rims (Metric Series) – Part 2: Tyre Dimensions and Load Carrying Capacities Motorcycle Tyres and Rims (Metric Series) – Part 3: Range of Approved Rim Contours
BDS ISO 5751-1:2012

BDS ISO 5751-2:2012

BDS ISO 5751-3:2012

174 Steel for the Re-Enforcement of Concrete –
Part-1: Plain Bars
Part-2: Ribbed Bars
BDS ISO 6935-1:2012
BDS ISO 6935-2:2016
175 Continuous Hot-Dip Aluminium/Zinc Coated Steel
Sheet of Commercial, Drawing and Structural Qualities
BDS ISO 9364:2011
176 Gas Cylinders – Refillable Seamless Aluminum Alloy
Gas Cylinders – Design, Construction and Testing.
BDS ISO 7866:2008
Gas Cylinders – Refillable welded Steel Cylinders –
Test Pressure 60 Bar and Below.
BDS ISO 4706:2008
Gas Cylinders – Refillable Seamless Steel Gas
Cylinders – Design, Construction and Testing – Part 1: Quenched and Tempered Steel Cylinders With Tensile Strength Less Than 1100 MPa.
BDS ISO 9809-1:2008
Gas Cylinders – Refillable Seamless Steel Gas
Cylinders – Design, Construction and Testing –
Part 2: Quenched and Tempered Steel Cylinders With
Tensile Strength Greater Than or Equal to 1100 MPa.
BDS ISO 9809-2:2008
Gas Cylinders – Refillable Seamless Steel Gas
Cylinders – Design, Construction and Testing – Part 3: Normalized Steel Cylinders.
BDS ISO 9809-3:2008
177 Ceramic Tiles – Definitions, Classification,
Characteristics and Marking
BDS ISO 13006:2015
D. Jute and Textile Products (15 items):
178 Poplin Fabric BDS 32:2011 (3rd Revision)
179 Cotton Sewing Thread BDS 33:1989 (1st Revision)
Reaffirmed 2005
180 Cotton Sharee – Powerloom BDS 63:2017 (3rd Revision)
181 Cotton Canvas BDS 319:2005 (3rd Revision)
182 Umbrella Cloth BDS 1125:2005 (1st Revision)
183 Polyester Blend Shirting (Market Varities) BDS 1148:2011 (2nd Revision)
184 Polyester Blend Suiting BDS 1175:2011 (2nd Revision)
185 Rubber Flat Transmission Belting of Textile
Construction for General Uses
BDS 1199:2005 (1st Revision)
186 Rubber Conveyor and Elevator Belting of Ply
Construction – Part-1 for General Use.
BDS 1200 (Part-1):2005 (1st Revision)
187 Industrial Sewing Threads Made Wholly or Partly
From Synthetic Fibres
BDS 1221:2011 (3rd Revision)
188 Asborbent Cotton BDS 1260:2016 (2nd Revision)
189 Sanitary Napkins BDS 1261:2019 (2nd Revision)
190 Handloom Cotton – Lungi Cloth BDS 1331:2017 (2nd Revision)
191 Textiles – Colour Fastness Ratings – Specification BDS 1758:2006
192 TextilesTests for Colour Fastness – Part E11: Colour
Fastness to Steaming
BDS ISO 105-E11:2004
E. Electrical and Electronics Products (35 items):
193 Tungsten filament lamps for domestic and similar
general lighting purposes – Performance requirements
BDS 17:2006 (3rd revision)
194 Ceiling Roses BDS 116:2006 (2nd revision)
195 Lead-acid starter batteries –
(a) Part-1: General requirements and methods of test (b) Part-2: Dimensions of batteries and dimension and marking of terminals
(c) Part-3: Dimension of batteries for heavy commercial vehicles
BDS 206 (Part-1):2002 (2nd revision) BDS 206 (Part-2):2002 (2nd revision)

BDS 206 (Part-3):2002 (2nd revision)

196 Performance and construction of electric circulating
fans and regulators
BDS 818:1998 (1st revision)
Amendment 1:2006
197 Water for use in secondary batteries BDS 834:2007 (1st revision)
198 Insulated flexible cords –
(a) Part-1: General requirements
(b) Part-2: Requirements for rubber insulated flexible cords
(c) Part-3: Requirements for PVC insulated flexible cords
(d) Part-4: Flexible cords insulated with varnished glass fibre
(e) Part-5: PVC insulated extensible leads
(f) Part-6: Methods of test
BDS 899 (Part-1):2000 (1st revision) BDS 899 (Part-2):2001 (1st revision)

BDS 899 (Part-3):2001
(1st revision), Amendment 1:2009
BDS 899 (Part-4):2001 (1st revision)

BDS 899 (Part-5):2001 (1st revision) BDS 899 (Part-6):2001 (1st revision)

199 PVC insulated cables (non-armoured for electric
power and lighting)
BDS 900:2010 (2nd revision)
200 Winding Wires –
(a) Part 1: Enameled round copper winding wires (b) Part-2: Enameled rectangular copper winding wires
(c) Part-3: Enameled round aluminium winding wires
(d) Part-4: Enameled rectangular aluminium winding wires
(e) Part-5: Test method
BDS 1034 (Part-1):2006 (1st revision) BDS 1034 (Part-2):2006 (1st revision)
BDS 1034 (Part-3):2006 (1st revision) BDS 1034 (Part-4):2006 (1st revision) BDS 1034 (Part-5):2006 (1st revision)
201 Bare aluminium and aluminium alloy conductors for
overhead power transmission
Aluminium conductors steel re-inforced for overhead power transmission
BDS 1036:2006 (1st revision)

BDS 1037:2003 (1st revision)

202 Three-phase induction motors BDS 1139:1986, Amendment 1:2006
203 Electronic type fan regulators BDS 1323:1991, Amendment 1:2006
204 Cut-out switches (main switches) BDS 1395:1993, Reaffirmed 2005
205 a) Cross linked polyethylene insulated PVC
sheathed cables – Part 1: Working voltages up to and including 1100 V
b) Cross linked polyethylene insulated PVC
sheathed cables – Part 2: For working voltages from
3.3 kV up to and including 33 kV
BDS 1521 (Part-1):1995

BDS 1521 (Part-2):1998

206 Porcelain insulator for overhead power lines with a
nominal voltage up to and including 1000 V
BDS 1543:2006 (1st revision)
207 Self-ballasted lamps for general lighting services –
Performance requirements
BDS 1734:2003
208 Energy efficiency rating for self-ballasted lamps and
modular type compact florescent lamps
BDS 1761:2013 (1st revision)
209 Power transformers – Part 1: General BDS IEC 60076 (Part 1):2016
210 Double-capped fluorescent lamps – Performance
requirements
BDS IEC 60081:2006
211 Primary Batteries –
(a) Part-1: General
(b) Part-2: Physical and electrical specifications
(c) Part-3: Watch batteries
(d) Part-4: Safety of lithium batteries
(e) Part-5: Safety of batteries with aqueous electrolyte
BDS IEC 60086 (Part-1):2005
BDS IEC 60086 (Part-2):2005
BDS IEC 60086 (Part-3):2005
BDS IEC 60086 (Part-4):2005
BDS IEC 60086 (Part-5):2005
212 Electric irons for household or similar use –
Methods for measuring performance
BDS IEC 60311:2018
213 Insulators for overhead lines with a nominal voltage
above 1000 V –
(a) Part-1: Ceramic or glass insulator units for ac systems – Definitions, test methods and acceptance criteria
(b) Part-2: Insulator strings and insulator sets for ac systems – Definitions, test methods and acceptance criteria
BDS IEC 60383 (Part-1):2006

BDS IEC 60383 (Part-2):2006

214 Power cables with extruded insulation and their
accessories for rated voltages from 1 kV up to 30 kV
(a) Part-1: Cables for rated voltage of 1 kV and 3 kV
(b) Part-2: Cables for rated voltage from 6 kV up to
30 kV
(c) Part-4: Test requirement on accessories for cables with rated voltage from 6 kV up to 30 kV
BDS IEC 60502 (Part-1):2018

BDS IEC 60502 (Part-2):2018

BDS IEC 60502 (Part-4):2018

215 AC electric ventilating fans and regulators for
household and similar purposes
BDS IEC 60665:2020
216 Switches for household and similar fixed electrical
installations – Part 1: General requirements
BDS IEC 60669 (Part-1):2018
217 Plugs and socket-outlets for household and similar
purposes –
a) Part-1: General requirements
b) Part 2-1: Particular requirements for fused plugs c) Part 2-2: Particular requirements for socket- outlets for appliances
d) Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations
e) Part 2-4: Particular requirements for plugs and socket-outlets for SELV
f) Part 2-5: Particular requirements for adaptors g) Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations
h) Part 2-7: Particular requirements for cord extension sets
BDS IEC 60884 (Part-1):2016
BDS IEC 60884 (Part-2-1):2016
BDS IEC 60884 (Part-2-2):2016BDS IEC 60884 (Part 2-3):2016

BDS IEC 60884 (Part 2-4):2016

BDS IEC 60884 (Part 2-5):2016
BDS IEC 60884 (Part 2-6):2016

BDS IEC 60884 (Part 2-7):2016

218 Electrical accessories – Circuit-breakers for
over-current protection for household and similar installations Part-1: Circuit-breakers for AC operation
BDS IEC 60898 (Part-1):2016
219 (a) Photovoltaic devices – Part 1: Measurement of
photovoltaic current-voltage characteristics
(b) Photovoltaic devices – Part 2: Requirements for reference solar devices
(c) Photovoltaic devices – Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data
(d) Photovoltaic devices –  Part 9: Classification of solar simulator characteristics
BDS IEC 60904 (Part-1):2020

BDS IEC 60904 (Part-2):2020

BDS IEC 60904 (Part-3):2020

BDS IEC 60904 (Part-9):2020

(e) Photovoltaic devices – Part 10: Methods of linear dependence and linearity measurements BDS IEC 60904 (Part-10):2020
220 Ballast for tubular fluorescent lamps – Performance
requirements
BDS IEC 60921:2005
221 AC supplied electronic ballasts for tubular
fluorescent lamps – Performance requirements
BDS IEC 60929:2005
222 Secondary cells and batteries for renewable energy
storage – General requirements and methods of test
– Part 1: Photovoltaic off-grid application.
BDS IEC 61427 (Part-1):2016
223 Electricity metering equipment (ac) – Particular
requirements – Part-11: Electromechanical meters for active energy (Class 0.5, 1 and 2)
BDS IEC 62053 (Part-11):2013
224 Electricity metering equipment (ac) – Particular
requirements – Part-21: Static meters for active energy (Classes 1 and 2)
BDS IEC 62053 (Part-21):2013
225 Electricity metering – Payment systems – Part: 31
Particular requirement – Static payment meters for active energy (Classes 1 and 2)
BDS IEC 62055 (Part-31):2017
226 Battery charge controllers for photovoltaic system –
Performance and functioning
BDS IEC 62509:2016
227 Self-ballasted LED lamps for general lighting
services with supply voltage > 50 V – Performance requirements
BDS IEC 62612:2015

বিএসটিআই লাইসেন্স করার নিয়ম

BSTI থেকে অনুমোদন পাওয়ার জন্য নিম্নোক্ত কাগজপত্র থাকতে হবে-

  • প্রতিষ্ঠানের ট্রেড লাইসেন্সের কপি
  • ট্রেডমার্ক রেজিস্ট্রেশনের কপি
  • TIN সার্টিফিকেটের কপি
  • পণ্য উৎপাদনে ব্যবহৃত যন্ত্রপাতির তালিকা
  • পণ্য উৎপাদনের প্রসেস ফ্লো চার্ট
  • কারখানার লে-আউট
  • পণ্যের মোড়ক/ লেবেলে থাকা সকল তথ্যাবলি
  • পণ্যের উপাদানগুলোর বিবরণ
  • এছাড়া প্রয়োজনমাফিক আরো কাগজপত্র লাগতে পারে।

উপরোক্ত কাগজপত্রগুলো প্রস্তুত করে এবার আপনাকে যেতে হবে তেজগাঁও শিল্প এলাকার BSTI -এর অফিসে। সেখান থেকে বিএসটিআই লাইসেন্স -এর জন্য আবেদন ফরম নিতে হবে । আপনি চাইলে ওয়েবসাইট থেকেও আবেদন ফরমটি ডাউনলোড করে নিতে পারবেন।

বিএসটিআই লাইসেন্স আবেদন ফরম

বিএসটিআই লাইসেন্স -এর আবেদন ফরম যথাযথভাবে পূরণ করে নির্ধারিত আবেদন ফি জমা দিতে হবে। আবেদন ফি প্রদানের পর সমস্ত কাগজপত্রগুলো একত্র করে BSTI এর One Stop Service Center -এ জমা দিতে হবে । সেখান থেকে তারা আপনাকে একটি Confirmation স্লিপ প্রদান করবে ।

বিএসটিআই লোগো
বিএসটিআই লোগো

এরপর সাধারণত ১-২ মাসের মধ্যে BSTI কর্মকর্তারা আপনার কারখানা পরিদর্শন করবেন। সেখানে গিয়ে তারা আপনার কারখানার উৎপাদিত পণ্য থেকে কিছু পণ্য স্যাম্পল হিসেবে সিল করবে এবং আপনার কারখানার আনুসংগিক বিষয়গুলো যাচাই করে দেখবে।
এরপর আপনাকে নির্ধারিত সময়ের মধ্যে নির্ধারিত টেস্টিং ফি প্রদানপূর্বক তাদের সিলকৃত পণ্য পুনরায় BSTI এর One Stop Service Center -এ গিয়ে জমা প্রদান করতে হবে।

এরপর BSTI ল্যাবে আপনার পণ্যের পরীক্ষা করা হবে এবং মান যাচাই করা হবে। BSTI -এর নির্ধারিত মানের সাথে যদি আপনার উৎপাদিত পণ্যের মান সামঞ্জস্যপূর্ণ হয় তবে তারা আপনাকে চূড়ান্ত লাইসেন্সের জন্য জানাবে।
চূড়ান্ত লাইসেন্স ফি প্রদানের মাধ্যমে আপনি পেয়ে যাবেন বিএসটিআই লাইসেন্স।

বিএসটিআই লাইসেন্স করতে কত টাকা লাগে

বিএসটিআই লাইসেন্স করতে পণ্যভেদে ফি আলাদা। পণ্যের ক্যাটাগরি, প্রতিষ্ঠানের আকার, যন্ত্রপাতি ইত্যাদি অনুযায়ী লাইসেন্স ফি নির্ধারিত হয়। বিএসটিআই-এর ফি সম্পর্কে জানতে নিচের লিংকে ক্লিক করুন-

বিএসটিআই ফি


সচরাচর জিজ্ঞাসা (FAQ)

১) বিএসটিআই-এর কাজ কী?

উত্তর: পণ্য, সেবা ও প্রক্রিয়ার জাতীয় মান প্রণয়ন, তদানুযায়ী পণ্য পরীক্ষণ ও পণ্যের গুণগত মান সনদ (সার্টিফিকেশন) প্রদান এবং ম্যানেজমেন্ট সিস্টেম সার্টিফিকেট প্রদান করে থাকে। এছাড়া দেশব্যাপী ওজন ও পরিমাপের সকল ক্ষেত্রে মেট্রিক পদ্ধতির প্রচলন এবং পরিমাপ যন্ত্রসমূহ ভেরিফিকেশন ও ক্যালিব্রেশনের দায়িত্বেও নিয়োজিত।

২) মান (Standards) কী?

উত্তর: সুনির্দিষ্ট কোন বিষয়ে সংশ্লিষ্ট বিশেষজ্ঞদের সমন্বিত সিদ্ধান্তের প্রেক্ষিতেনির্ধারিত কোনডকুমেন্ট, যা স্বীকৃত সংস্থা কর্তৃক প্রকাশিতহয় সেটিকেই মান (Standards)বলা হয়। যা কোন পণ্য, সেবা কিংবা প্রক্রিয়া সম্পর্কে ন্যুনতম গুণাগুণের নিশ্চয়তা বিধান করে।

৩) জাতীয় মান (National Standards) কী?

উত্তর: বাংলাদেশে জাতীয় মান প্রণয়নের জন্যসরকার স্বীকৃত একমাত্র দায়িত্ব প্রাপ্ত জাতীয় মান সংস্থা হচ্ছে বিএসটিআই। বিএসটিআই কর্তৃক প্রণীত/প্রকাশিত মান(Standards) হচ্ছে জাতীয় মান তথা National Standards।

৪) বিএসটিআই ব্যতীত অন্য কেউ জাতীয় মান প্রণয়ন করতে পারে কী?

উত্তর: না, তবে প্রয়োজনবোধে অন্য কোন বিশেষায়িত সংস্থা বিশেষ কোন ডকুমেন্ট ডেভলাপ করে থাকলে সেটিকে বিএসটিআই-এর মাধ্যমে সরকারের পক্ষে গৃহীতকরণ সাপেক্ষে জাতীয় মান হিসেবে স্বীকৃতি প্রদান পূর্বক প্রকাশ করা যেতে পারে।

৫) বিএসটিআই অফিসটি কোথায় অবস্থিত?

উত্তর: প্রধান কার্যালয় ১১৬-ক, তেজগাঁও শিল্প এলাকা, ঢাকায় অবস্থিত। এছাড়া দেশের প্রতিটি বিভাগীয় সদরে বিভাগীয় অফিস এবং বগুড়া, ফরিদপুর, কুমিল্লা এবং কক্সবাজার জেলায় স্থানীয় জেলা অফিস রয়েছে।

৬) বাধ্যতামূলক (Mandatory/compulsory) পণ্যসমূহের মানসনদ (সার্টিফিকেট) গ্রহণ/প্রয়োজনীয়তা কী?

উত্তর: বিএসটিআই প্রকাশিত জাতীয় মান সমূহের মধ্য হতে ভোক্তার স্বাস্থ্যগত নিরাপত্তা বিবেচনায় জনগুরুত্বসম্পন্ন কতিপয় পণ্যকে সরকার গেজেট জারীর মাধ্যমে পণ্যটি উৎপাদন, আমদানি, বিপণন ও বিক্রয়ের পূর্বে বিএসটিআই হতে সংশ্লিষ্ট মান (Standards) অনুসরণে পরীক্ষণের মাধ্যমে বিএসটিআই হতে সনদ (সার্টিফিকেট) গ্রহণের বাধ্যবাধকতাই হচ্ছে বাধ্যতামূলক সার্টিফিকেশন। সরকার এ যাবত মোট ১৮১ টি পণ্যকে বিক্রয় ও বিপণনের পূর্বে বিএসটিআই হতে সংশ্লিষ্ট মান(Standards)-এর অনুকূলে সনদ গ্রহণের বাধ্যবাধকতা আরোপ করেছে। বিস্তারিত ১৮১ টি পণ্যের তালিকা ওয়েবসাইটে রয়েছে।

৭) স্বেচ্ছামূলক (Voluntary) পণ্যের মান সনদ গ্রহণ কী?

উত্তর: বাধ্যতামূলক সার্টিফিকেশনের ১৮১ টি পণ্য ব্যতীত বিএসটিআই প্রণীত অবশিষ্ট পণ্যের মান (Standards)সমূহের অনুকূলে উৎপাদিত পণ্যকে স্বেচ্ছামূলক (Voluntary) পণ্য বলা হয়ে থাকে। একজন উৎপাদনকারী স্বেচ্ছাপ্রণোদিত হয়ে ভোক্তার আস্থা অর্জনে বিএসটিআই হতে জাতীয় মান অনুসরণেবাধ্যতামূলক পণ্যসমূহের ন্যায় লাইসেন্স তথা সনদ গ্রহণ করতে পারে। এটি সংশ্লিষ্ট উৎপাদনকারীর ইচ্ছা নির্ভর, তবে বিএসটিআই-এর পক্ষ হতে লাইসেন্স গ্রহণের কোনরূপ বাধ্যবাধকতা নেই।

৮) বিএসটিআই হতে মান সনদ গ্রহণ ঝামেলাপূর্ণ/সময়সাপেক্ষ কী?

উত্তর: না, আবেদনের সাথে সংযুক্ত প্রয়োজনীয় কাগজপত্রাদি যথাযথ হলে সিটিজেন চার্টারে উল্লিখিত সময় সীমার মধ্যেই ঝাঁমেলাহীনভাবে গ্রাহকদের সেবা প্রদান করা হয়ে থাকে।

৯) সরকার নির্ধারিত ফি পরিশোধ করে আমি ব্যক্তিগত প্রয়োজনে কোনো পণ্য বিএসটিআই হতে পরীক্ষা করিয়ে নিতে পারি কী?

উত্তর: না, লাইসেন্স প্রদানের উদ্দেশ্য ব্যতীত গ্রাহকদের অনুরোধের প্রেক্ষিতে ফি পরিশোধ করে কোনরূপ পণ্য পরীক্ষণ সেবা প্রদান করা হয় না।

১০) বিএসটিআই কোনো গবেষণা করে কী?

উত্তর: না।

১১) অন্য কোন সংস্থা/প্রাইভেট কোন ল্যাব হতে প্রাপ্ত ল্যাব রিপোর্টের ভিত্তিতে কোন পদক্ষেপ গ্রহণ করা হয় কী?

উত্তর: না।

১২) হালাল সনদ বিএসটিআই হতে প্রদান করা হয় কী?

উত্তর: না।

১৩) বিএসটিআই-এর লাইসেন্সের জন্য আবেদনের পূর্বে কী কী কাগজপত্রাদি প্রয়োজন?

উত্তর: সাধারণভাবে হালনাগাদ ট্রেড লাইসেন্স, হালনাগাদ আয়কর সনদ (TIN) এবং পণ্যের মোড়কের জন্য ট্রেড মার্ক নিবন্ধন প্রয়োজন পড়ে। এছাড়া পণ্যভেদে আরো বিশেষ কাগজপত্রাদি প্রয়োজন পড়ে, যা আবেদনের পূর্বে প্রয়োজনীয় কাগজপত্রাদির বিষয়ে স্থানীয় অফিসে যোগাযোগের মাধ্যমে নিশ্চিত হওয়া উত্তম।

১৪) নতুন কোন মান(Standards) প্রণয়ন কিংবা পুরনো মান রিভিশনের ক্ষেত্রে কতদিন সময় প্রয়োজন?

উত্তর: জাতীয় মান প্রণয়ন এবং রিভিশন একটি সুনির্দিষ্ট পদ্ধতিগত বিষয় হওয়ায় নতুন কোন মান প্রণয়নে এবং পুরনো মান রিভিশনের ক্ষেত্রে একই সমান সময় প্রয়োজন হয়। বিএসটিআই কর্তৃক জাতীয় মান প্রণয়নে আন্তর্জাতিক রীতি-পদ্ধতি এবং WTO-TBT Agreement-এ উল্লিখিত বিধানাবলী অনুসরণ করে থাকে।ফলে সকল রীতি-পদ্ধতি অনুসরণে একটি নতুন মান প্রণয়ন অথবা রিভিশনে ন্যুনতম ০৬ (ছয়) মাস হতে ক্ষেত্রবিশেষে ০৩ (তিন) বছর কিংবা তদোধিক সময়ের প্রয়োজন হয়।

১৫) আমদানিকৃত সকল পণ্যের জন্য বিএসটিআই-এর সনদ গ্রহণ প্রয়োজন পড়ে কী?

উত্তর: সরকার ঘোষিত হালনাগাদ আমদানি নীতি আদেশ (Import policy order)-এ উল্লিখিত পণ্যসমূহের জন্য আবেদনের মাধ্যমে বিএসটিআই হতে পণ্য পরীক্ষণের পর ছাড়পত্র গ্রহণের বাধ্যবাধকতা রয়েছে।

১৬) জাতীয় মান সংগ্রহের উপায় কী?

উত্তর: বিএসটিআই ওয়েবসাইটে যুক্ত ‘ই-ক্যাটালগ এন্ড বিডিএস সেল’ শীর্ষক লিংকের মাধ্যমে সুনির্দিষ্ট পদ্ধতি অনুসরণ করে সরকার নির্ধারিত নামমাত্র মূল্য পরিশোধ সাপেক্ষে বাংলাদেশ জাতীয় মান সংগ্রহ করা যায়। এছাড়া ঢাকায় অবস্থিত সংস্থার প্রধান কার্যালয়ের ওয়ানস্টপ সার্ভিস সেন্টার হতে এবং বিভাগীয় ও জেলা অফিসসমূহে যোগাযোগের মাধ্যমে গ্রাহকগণ জাতীয় মান সংগ্রহ করতে পারেন।

১৭) বিএসটিআই-এর কোথা হতে কোন ধরনের সেবা পাওয়া যায়?

উত্তর: জাতীয় মান প্রণয়ন/রিভিশন সংক্রান্ত প্রস্তাব এবং বিভিন্ন পরিমাপ যন্ত্রের ক্যালিব্রেশন কার্যক্রমপ্রধান কার্যালয়, ঢাকা হতে প্রক্রিয়াজাত করা হয়। এছাড়া লাইসেন্স প্রদান বিষয়ক সেবাসমূহ অঞ্চলভিত্তিক বিভাগীয় অফিস ও জেলা অফিস হতে সেবা পাওয়া যায়।

বিশেষ দ্রষ্টব্য: এই নিবন্ধের লেখা শুধুমাত্র ধারণা দেয়ার জন্য। বিস্তারিত তথ্য জানতে বিএসটিআই -এর অফিসে যোগাযোগ করুন। এছাড়া ভিজিট করতে পারেন- www.bsti.gov.bd এই ওয়েবসাইটে।